Traveling West on I-40 from Winston-Salem & points East

1. Exit I-40 at Exit #126
2. Turn left at top of exit ramp onto McDonald Parkway
3. Merge into left lanes
4. Turn left at the third traffic light onto US Hwy 70E
5. Continue straight on US Hwy 70E for about 1/2 mile
6. Manufacturing Solutions Center located in the back left corner of East Campus
   

Traveling East on I-40 from Asheville & points West

1. Exit I-40 at Exit #126
2. Turn right at top of exit ramp onto McDonald Parkway
3. Merge into left lanes
4. Turn left at the second traffic light onto US Hwy 70E
5. Continue straight on US Hwy 70E for about 1/2 mile
6. Manufacturing Solutions Center located in the back left corner of East Campus
   

Directions to CVCC East Campus from US Highway 321

1. From Gastonia take US 321 N
2. Take Exit #33
3. At top of exit ramp turn right on Startown Road
4. Travel approximately 9 miles on Startown Road to intersection with US Highway 70
5. At the traffic light at US 70 turn right and remain in the far right lane
6. Continue straight on US Hwy 70E for about 1/2 mile
7. Turn right at the third traffic light at Northern Tool and Equipment
8. Manufacturing Solutions Center located in the back left corner of East Campus
   
   *** Park anywhere in the East Campus parking lot.  MSC has limited visitor parking near MSC entrance on the left side of the building. ***